Hot Rods and Kustom Cars
For every big name shop there’s almost always a group of hard working folks behind the scenes. For 25 years Corey Conyers has been turning out amazing work at shops without much fanfare for himself. It’s not the fault of the guys he’s worked for, the media needs brevity so it’s easier to talk about Tom Hanna’s shop or Cole Foster’s but for the last 25 years Conyers has been one of the behind the scenes folks helping to turn out fantastic cars from these shops.
See you at a show,
Royboy
———————————————————————————————
If you want to this blog in your email inbox each time the blog goes live, go on up to the top right hand corner of the website and enter your email address. The last day of each month I randomly pick 1 subscriber to win a prize package. This month’s prize is a pinstriped piece from Pinstriping By Lizzie, a Royboy Knit Winter Hat & a shirt from Hot Rod Hill Climb!
So yesterday I posted about the new transmission cross-member that my buddy Ryno at Ryno Built did for me. While I was there I snapped some photos of some of the other rides that are at Ryno Built. His truck was the 62 Unibody Ford that I was lucky enough to shoot for the cover of the Feb. 2014 issue of Classic Trucks Magazine. Since selling the truck to it’s new east coast home he’s been busy working on a Mercury project for a client from Texas, and driving a cool Chevy wagon that he bought from that same client.
Thanks for following along folks, tomorrow’s post will feature a shop visit from my drive home where I stopped at Fast AL’s Upholstery.
See you at a show,
Royboy
I’ve known for awhile that the transmission cross-member that was in my 1963 Ford Galaxie 500 was hanging too low. It was dragging too much and on big bumps on the highway it would slam the pavement, no bueno. So when I was talking to my buddy Ryno at Ryno Built about it he said to come down to his shop in the Joplin area and he’d get a new one fabbed up.
When we got the car up on the lift it was obvious that things were more dire than I thought. The existing cross-member had completely broken into two pieces. One more big bump could have lost it completely, that could lead to any manner of catastrophic consequences. I’ve seen driveshafts come out and nearly slam into the car I was in behind the drive shaft’s prior vehicle. A couple of inches difference and that drive shaft would have come through the windshield. I cannot imagine if my car broke and caused something like that to happen. Best case scenario the failure would leave me stranded on the side of the road, worst case scenario could be deadly. Just another note to encourage you to make sure your ride is mechanically sound not just for your safety but for the safety of those around you.
If you need custom fabrication done for your ride, get ahold of Ryno Built and he can get your car on the road again!
See you at a show,
Royboy
On my way to the Hot Rod Revolution (which was being cancelled as I shot these photos) I stopped by my friends’ Chaotic Customs in Mulvane, KS to see what they were up to. The shop was full of projects and folks working on them. Drew Carlson was nice enough to take a few minutes off of working on a project to show me around the shop and explain what they’d been up to recently since finishing the SEMA build on Mike’s 40 Ford Pickup. The photos below should all be captioned and explain what you’re seeing. I will try to stop in a couple of more times over the next few months for more updates on these projects.
See you at a show,
Royboy
If you want to have this blog delivered to your email inbox daily go to the top right hand corner of the page at royboyproductions.com and enter your email address. At the end of each month 1 lucky subscriber will be picked for a prize from Royboy Productions.
Shop Visit: Ryno Built and the Sharer 50 Merc “Sweet Memories”
After the Stray Kat Feed my dad and I loaded up in the F250 and headed 2 hours east to Ryno Built to take a peek at a frame that he’s been working on for my buddy Jeff from Texas. The plan is to get the frame finished up, painted and then move on to body work including a chop. The frame came in with a Street Rod Engineering Mustang II subframe already installed but Ryno finished it out and smoothed out some of the welds, etc.
Here’s some photos of the Chassis with the new Coker wide whites and chrome wheels, notice the exhaust and fuel line/brake line tunnels made in the x-frame so that the frame lays flat.
Follow along with the entire build thread here.
See you at a show.
Royboy
Use the Subscribe box at the top right corner of the page to receive the latest posts via email each day
Don’t forget to get your 2014 Calendar for Charity order in ASAP! They’re already going fast, once they’re gone they’re gone!
Another of Jack’s recently finished 51 Ford.
Jim’s Olds is coming together nicely after sitting for a long time.
The Stears’ Ford all the way from Kansas City
Don’s Buick again 🙂
The Mistretta Family rides in style.
One of the many full on kustom builds going on at Chaotic Customs. This started life as a 1953 Chevrolet, it’s being transformed into an Old after a chop and swapping on an Olds front clip.
I love Stella’s new look.
See you at a show,
Travis
April 27, 2013
Chaotic Customs
246 Industrial Ave.
Mulvane, KS
For the 2nd year in a row I attended the Chaotic Customs Open House on Saturday April 27th. Here are some of the photos of the cars that showed up. A good time was easy to have with this many kool people. You need to make it next year.
Jack’s 40 Ford
Jack’s 40 Ford
Chris and Karma Carlson’s 1960 Pontiac “Stella”
Some new wall art in the shop.
Jack’s 51 Ford is done!
Mike’s 40 Ford Pickup is chopped, channeled, sectioned, lengthened, just about every ‘ed you can do to a vehicle. and it’s still a long way from done. Look for it’s debut at SEMA this year.
Don’s beautiful Buick
The 34 Ford that Chaotic took to SEMA and displayed at Barrett-Jackson in the last year.
Zombie Speed Shop’s International
More tomorrow!
See you at a show,
Travis
Often when I’m traveling I take some slight detours to stop at some shops that I know. On the way to the Texas Thaw I made a few of these stops. First at Chaotic Customs in Mulvane, KS.
Chaotic is busy at work with this beautiful 40 Ford pickup for Mike Young. The truck’s body is being massaged in every way imaginable for what will in the end be a subtle custom look to the untrained eye. The cab has been chopped, lengthened, sectioned, channelled, but when finished you’ll have to have a stock one sitting next to it to see the full extent of the differences.
Another project currently underway at Chaotic is a 1950 Oldsmobile Delivery. Well it started life as a Chevy Delivery, then it was chopped, an olds front clip was grafted on and the customizing began. The custom hood’s underside is being finished now.
Spy pic of Jack’s 51 Ford, more on this to come when the car is done.
This 1982 Chevy Malibu wagon may not be a car you normally see customized but it’s turning out pretty kool.
The 34 Ford awaits another polish job before heading off to the Detroit Autorama (they are loaded in the building now for the show there this weekend.)
That’s some of what Chaotic is working on, stop by their facebook and say hi.
See you at a show,
Travis
So, on Monday of this week I told you about my weekend, traveling to the Joplin area to shoot Ryno’s 61 Ford pickup, and then off to Aaron’s Fast AL’s Upholstery on the way home for a bit of a visit. Yesterday I shared some photos of the visit to Fast AL’s, here are some of the time spent at Ryno Built.
At first I wasn’t sure if Ryno had some secrets he wasn’t telling but no this is just the lace used to get all of the kool lacework in the paint job of the truck…
Some TrueSpoke Supremes on a 1931 Studebaker President Sedan, info on the build can be found here.
With the frame nearing completion, the Stude body has been placed so the floor supports can be build and some other items fabbed.
Looks to be the beginnings of a healthy ride.
Floor supports in place.
A 4 door Stude is not your normal idea of a hot rod, but this is not your normal hot rod shop. 
Next time I’ll get a bunch more photos of the wagon that is being built for Mrs. Ryno. For now for info on the 60 Chevrolet Kingswood Wagon that Ryno is building for his wife, click here.
For more info on Ryno Built you can contact him on Facebook. Hire him to build you something safe, kool and fast. For the last visit to Ryno Built click here.
See you at a show,
Travis
So as I sit here typing we’re a couple of hours away from the 3rd Annual Mid Decembrrrr Run. Folks from hundreds of miles away are now on their way to Salina, KS to meet up and go on a long drive in our classic cars. It’s been a really good time so far, hopefully this year is too!
This will be it as far as 2012 goes for me and my cameras. It’s been a fantastic year, went new places, met new people and had a great time throughout it all. For 2012 there are 33 galleries with 7,987 photos so far, whew, my shutter finger is tired! To see them all go here: http://royboyproductions.smugmug.com/Cars/2012
Some of my favorites are
Fuel Altered “Black Mariah” doing a smoky burnout at the 2012 KKOA Leadsled Spectacular, see more from that weekend here.
Twin Hemi’d rail doing a smoky burnout at the 2012 KKOA Leadsled Spectacular, see more from that weekend here.
The Anderson 36 at the 2012 Iron Invasion, see more from that show here.
The Chrismas Brothers Coupe at the 2012 Iron Invasion, see more from that show here.
About a year ago I joined Instagram, it’s been a fun way to give new life to some old photos and spread the word about what it is that I do here. http://instagram.com/royboyprods is where you can find those photos if you are not already on Instagram.
Have a great weekend, I’m off with a bunch of my rod/kustom friends for a road trip. Merry Christmas and I’ll see you at a show,
Travis
In early November I made the trip down to my buddy Ryno’s shop Ryno Built in SWMO. The plan was to shoot some video of Ryno’s 1961 Ford Unibody pickup for an upcoming feature video. While I was there I found too much cool stuff to not snap a few images.
Ryno Built Shop
Ryno’s Caddy was parked outside the shop, it’s just a kool vehicle all around.
He’s had it for years and has driven it all over the place, check your back issues of Car Kulture Deluxe for a feature on it with all of the pertinent details.
Also at Ryno’s shop were a few projects. This Pro-Touring Mustang build started out with a 1965 Shelby GT350 Mustang which had been dinged up pretty well in the Joplin tornado in 2011. Most of the damaged body has been replaced, and a ton of work has been done to prep the car for it’s massive tires and VASTLY improved suspension. Ryno’s worked with TCI to get the suspension customized for the size of rollers that he wanted to run. You can see the finished work is impeccable, and that there are lots of areas roughed in waiting for finalizing. You can find more info on the Mustang build here on pro-touring.com
Also under construction at the shop is a 31 Studebaker President Sedan, info on the build can be found here.
Although it’s moved on to a new owner this is a 63 Caddy that Ryno build a few years ago, here is a thread with more info on that build.
A smart husband makes the wife happy, here’s a 60 Chevrolet Kingswood Wagon that Ryno is building for his wife, more info on the build here.
Needless to say there is a lot going on at Ryno Built.
If you need some top notch fab work done, get ahold of Ryno!